E modeling
==============

Characteristics of modeling
-----------------------------------

The modeling is of the AXIS type.


.. image:: images/Object_44.svg
    :width: 343
    :height: 238


.. _RefImage_Object_44.svg:

Loading and boundary conditions are modelled by:

FACE_IMPO =_F (GROUP_MA = D1, DY= 0.)

The temperature TEMP1, drying SECH1, and hydration fields HYDR1 are applied to the entire model.

We use the NEWTON and IMPLEX resolution method with 2 load steps.


Characteristics of the mesh
----------------------------

.. csv-table::

    "Number of knots:", "21"
    "Number of meshes and types:", "4 QUAD8"



Tested sizes and results
------------------------------

For the calculation with STAT_NON_LINE, the components of the EPSI_NOEU deformation tensor are tested after 3600 days. It is also verified that the stresses SIEF_NOEU are zero as well as the plastic deformation (EPSP_NOEU) and the damage variable (VARI_NOEU, V1).


.. csv-table::

    "**Variables**", "**Instant**", "**Reference Type**", "**Reference**", "**Tolerance**"
    ":math:`{\mathrm{\epsilon }}_{\mathit{xx}}` ", "3600"," ANALYTIQUE "," ", "6.53 10-4"," 0.50%"
    ":math:`{\mathrm{\epsilon }}_{\mathit{yy}}` ", "3600"," ANALYTIQUE "," ", "6.53 10-4"," 0.50%"
    ":math:`{\mathrm{\epsilon }}_{\mathit{xx}}^{p}` ", "3600"," ANALYTIQUE ", "0. ", "1.00E-006"
    ":math:`{\mathrm{\epsilon }}_{\mathit{yy}}^{p}` ", "3600"," ANALYTIQUE ", "0. ", "1.00E-006"
    ":math:`{\mathrm{\sigma }}_{\mathit{xx}}` ", "3600"," ANALYTIQUE ", "0. ", "1.00E-006"
    ":math:`{\mathrm{\sigma }}_{\mathit{yy}}` ", "3600"," ANALYTIQUE ", "0. ", "1.00E-006"
    ":math:`D` ", "3600"," ANALYTIQUE ", "0. ", "1,00E-006"