3. Modeling A

3.1. Characteristics of modeling

The modeling is AXIS.

Loading and boundary conditions are modelled by:

FACE_IMPO =_F (GROUP_MA = D1, DY= 0.)

The temperature TEMP1, drying SECH1, and hydration fields HYDR1 are applied to the entire model.

3.2. Characteristics of the mesh

Number of knots:	21
Number of meshes and types:	4 QUAD8

3.3. Tested sizes and results

For the calculation with STAT_NON_LINE (with COMPORTEMENT), the components of the strain tensor EPSI_NOEU are tested after 3600 days. We also check that the stresses SIEF_NOEU are zero as well as the plastic deformation (EPSP_NOEU).

For the calculation with MECA_STATIQUE, the components of the EPSI_NOEU deformation tensor are tested after 3600 days. We also check that constraints SIGM_NOEU are zero.

Calculation STAT_NON_LINE

Variables	Moment	Reference Type	Reference	tolerance
	3600	ANALYTIQUE	6.53 10-4	0.50%
	3600	ANALYTIQUE	6.53 10-4	0.50%
	3600	ANALYTIQUE		1.00E-006
	3600	ANALYTIQUE		1.00E-006
	3600	ANALYTIQUE		1.00E-006
	3600	ANALYTIQUE		1.00E-006

Calculation MECA_STATIQUE

Variables	Moment	Reference Type	Reference	tolerance
	3600	ANALYTIQUE	6.53 10-4	0.50%
	3600	ANALYTIQUE	6.53 10-4	0.50%
	3600	ANALYTIQUE		1.00E-006
	3600	ANALYTIQUE		1.00E-006