.. _V3.05.300:

**v3.05.300** SSLX300 — Validation of the COMBINAISON_CHARGE macro-command for the combination of mechanical and thermal loads
========================================================================================================================================

**Summary:**

The objective of this test is to validate order COMBINAISON_CHARGE in the case of a mixture of different models: 3D model, shell models (DKT, COQUE_3D) and beam model (elements POU_D_E), and a mixture of different types of mechanical and thermal loads.

Four models use the mesh of the sdnv112a test case to test different cases:


* sslx300a: mix of models: DKT, POU_D_T, POU_D_E


* sslx300b: mix of models: DKT, POU_D_EM, POU_D_TGM


* sslx300c: mix of models: DKT, BARRE,, POU_D_T, DIS_T


* sslx300d: mix of models: DKT, BARRE,, POU_D_T, DIS_TR

Five models use the sslx100c test case mesh to test different cases:


* sslx300e: mix of models: 3D, COQUE_3D, POU_D_E, DIS_TR


* sslx300f: mix of models: 3D, DKT,, MEMBRANE, CABLE, DIS_TR


* sslx300g: mix of models: 3D, COQUE_3D,, POU_D_E, GRILLE_MEMBRANE, DIS_TR


* sslx300h: mix of models: 3D, DKT,, POU_D_E, GRILLE_EXCENTRE, DIS_TR


* sslx300i: mix of models: 3D, COQUE_3D, 2D_ BARRE, GRILLE_MEMBRANE, DIS_TR


.. toctree::
    :hidden:

    self

.. toctree::
    :maxdepth: 2
    :numbered:

    Probl_me_de_r_f_rence
    Solution_de_r_f_rence
    Mod_lisation_A
    Mod_lisation_B
    Mod_lisation_C
    Mod_lisation_D
    Mod_lisation_E
    Mod_lisation_F
    Mod_lisation_G
    Mod_lisation_H
    Mod_lisation_I
    Synth_se_des_r_sultats