E modeling
==============


Characteristics of modeling
-----------------------------------

The entire pipe is meshed with TUYAU elements, straight or angled, based on 4-knot meshes.


Characteristics of the mesh
----------------------------

18 SEG4 stitches (10 in the elbow, 4 in each right part).


Tested values
---------------


.. csv-table::

    "**Load case**", "**Point movement** :math:`D` ", "**Reference (mod B)**", "**Aster**", "**% diff**"
    ":math:`\mathrm{Mz}=17000\mathrm{Nm}` "," :math:`\mathrm{DY}(\mathrm{mm})` ", "0.0186", "0.01854", "0.4"
    ":math:`\mathrm{My}=17000\mathrm{Nm}` "," :math:`\mathrm{DZ}(\mathrm{mm})` ", "—0.0154", "—0.0153", "0.2"