C modeling
==============


Characteristics of modeling
------------------------

All the piping is modelled in TUYAU_6M (6 Fourier modes).


Characteristics of the mesh
----------------------------

86 stitches SEG3


Tested values
---------------


.. csv-table::

    "**Load case**", "**Point movement** :math:`D` ", "**Reference**", "**Aster**", "**% diff**"
    ":math:`\mathrm{Mz}=17000\mathrm{Nm}` "," :math:`\mathrm{DY}(\mathrm{mm})` ", "0.02", "0.0199", "0.01"
    ":math:`\mathrm{My}=17000\mathrm{Nm}` "," :math:`\mathrm{DZ}(\mathrm{mm})` ", "—0.015657", "—0.01598", "2"