Modeling A
==============


Characteristics of modeling
-----------------------------------

1 mesh POI1 (modeling DIS_TR), 1280 stitches QUAD4 (modeling DKT), 4 stitches SEG2 (POU_D_E). 32 stitches SEG2 on each edge of the shell.


Characteristics of the mesh
----------------------------

Number of knots: 4416

Number of meshes and types: 1 POI1, 4 SEG2, 4, 1280 QUAD4


Tested values
---------------

Displacements and rotations at point :math:`\mathrm{P2}` (to be multiplied by :math:`1.E-10m`).


.. csv-table::

    "**Load case**", "**Identification**", "**Reference**", "**Aster**", "**% difference**"
    "Traction", ":math:`\mathrm{DX}` ", "2.8273", "2.7942", "1.2"
    "Traction", ":math:`\mathrm{DY}` ", "1.6324", "1.6132", "1.2"
    "Torsion", ":math:`\mathrm{DRX}` ", "1.93195", "1.93195", "1.8713", "3.1"
    "Torsion", ":math:`\mathrm{DRY}` ", "1.1154", "1.1154", "1.0804", "3.1"
    "Flexion :math:`Y` "," :math:`\mathrm{DZ}` ", "—68.64", "—64.88", "5.5"
    "Flexion :math:`Y` "," :math:`\mathrm{DRX}` ", "—0.858", "—0.827", "3.7"
    "Flexion :math:`Y` "," :math:`\mathrm{DRY}` ", "1.4861", "1.4861", "1.4319", "3.7"
    "Flexion :math:`Z` "," :math:`\mathrm{DX}` ", "—34.32", "—32.44", "5.5"
    "Flexion :math:`Z` "," :math:`\mathrm{DY}` ", "59.44", "59.44", "56.19", "5.5"
    "Flexion :math:`Z` "," :math:`\mathrm{DRZ}` ", "1.716", "1.653", "3.7"