C modeling
==============


Characteristics of modeling
-----------------------------------

Method MAILLAGE is used by PROPA_FISS.

The POST_K1_K2_K3 operator is used to estimate stress intensity factors.


Characteristics of the mesh
----------------------------

The same mesh is used as for modeling A.


Tested sizes and results
------------------------------

We test, in non-regression with a tolerance of :math:`\text{0.1\%}`, the position of the crack bottom at the last iteration of propagation by recording the extremes of the ordinates of the points that compose it.


.. csv-table::

    "**Propagation instant**", ":math:`\mathrm{Max}\mathrm{Coord}{y}_{i}` "," :math:`\mathrm{Min}\mathrm{Coord}{y}_{i}`"
    "3", "2.6", "2.592"