.. _V3.04.303:

**v3.04.303** SSLV303 - Built-in cylinder under own weight and pressure
========================================================================

**Summary:**

The aim of the test is to validate a gravity load as well as a pressure, based on a 2D analysis with Fourier series decomposition of the load.

Two models are adopted for this analysis; they differ in terms of the keyword used to define severity:


1. modeling A: to validate the keyword PESANTEUR,


2. modeling B: to validate the FORCE_INTERNE keyword.

The gravity is calculated in mode 1, and the pressure applied is given in mode 1.

The two load cases are combined and compared with a numerical calculation in 3D modeling (model C).

A fourth modeling (D) is built in order to validate the FORCE_INTERNE keyword defined from a function.


.. toctree::
    :hidden:

    self

.. toctree::
    :maxdepth: 2
    :numbered:

    Probl_me_de_r_f_rence
    Solution_de_r_f_rence
    Mod_lisation_A
    Mod_lisation_B
    Mod_lisation_C
    Mod_lisation_D
    Synth_se_des_r_sultats