3. Modeling A

3.1. Characteristics of modeling

We use a linear relationship like RBE3.

3.2. Characteristics of the mesh

The mesh contains 9 nodes, 1 element of type POI1, 1 element of type HEXA8.

3.3. Tested sizes and results

Identification	Reference Value	Tolerance
NOEUD =”N000007”, NOM_CMP =”DX”, NOEUD =”N000006”, NOM_CMP =”DY”, NOEUD =”N000002”, NOM_CMP =”DZ”, NOEUD =”N000002”, NOM_CMP =”DX”, NOEUD =”N000002”, NOM_CMP =”DY”, NOEUD =”N000007”, NOM_CMP =”DZ”, NOEUD =”N000009”, NOM_CMP =”DX”, NOEUD =”N000009”, NOM_CMP =”DY”, NOEUD =”N000009”, NOM_CMP =”DZ”, NOEUD =”N000009”, NOM_CMP =” DRX “, NOEUD =”N000009”, NOM_CMP =” DRY “, NOEUD =”N000009”, NOM_CMP =” DRZ “,	2.09288E-05 -7.29517E-06 0.00000E+00 -6.23697E-06 -2.45257E-05 -2.79835E-05 8.655062E-05 3.349630E-05 -7.131093E-05 -1.834213E-05 1.222809E-05 -1.493772E-05	3rd -4% 1st -4% 1e-10 1st -4% 2nd -4% 1st -4% 1st -4% 1st -4% 1st -4% 1st -4% 1st -4% 1st -4%