B modeling
==============


Tested sizes and results
------------------------------

The quantities tested are always the displacements at nodes 1 and 3 shown in the.

In this modeling, they are tested in relation to the values obtained by Modeling A as well as in non-regression.


+------------+--------------------+-------------+-------------+
|**Location**|**Component** (DEPL)|**VALE_REFE**|**Precision**|
+------------+--------------------+-------------+-------------+
|Node 1      |DX                  |0.0076284 m  |1.0E-6       |
+            +--------------------+-------------+-------------+
|            |DY                  |0.0074515 m  |1.0E-6       |
+            +--------------------+-------------+-------------+
|            |DZ                  |0.0104914 m  |1.0E-6       |
+------------+--------------------+-------------+-------------+


+------------+--------------------+-------------+-------------+
|**Location**|**Component** (DEPL)|**VALE_REFE**|**Precision**|
+------------+--------------------+-------------+-------------+
|Node 3      |DX                  |0.0074704 m  |1.0E-6       |
+            +--------------------+-------------+-------------+
|            |DY                  |0.0076102 m  |1.0E-6       |
+            +--------------------+-------------+-------------+
|            |DZ                  |0.0108583 m  |1.0E-6       |
+------------+--------------------+-------------+-------------+


.. csv-table::

    "**Identification**", "**Reference type**"
    "Node 1— DEPL /DX DY DZ", "NON_REGRESSION"
    "Node 3— DEPL /DX DY DZ", "NON_REGRESSION"