v3.03.505 SSLS505 — Composite plate subject to mechanical deformations of purely thermal origin

Summary:

The objective of this test is to analytically validate the mechanical deformation of thermal origin of composite plates on a mesh composed of a quadrangle element with 4 nodes.

MODÉLISATION A: homogeneous plate DKT with orthotropic thermo-elastic behavior via DEFI_COMPOSITE.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainties about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. Summary of results