1. Reference problem

1.1. Geometry

1.2. Material properties

The properties of the material from which the plate is made are as follows:

Unidirectional (\(U\)):

\({E}_{l}=4.{10}^{10}\mathrm{Pa}\)	\({E}_{t}=0.16{10}^{10}\mathrm{Pa}\)	(\(l\iff x\); \(t\iff y\))
\({G}_{\text{lt}}={G}_{\text{lz}}=8.{10}^{8}\mathrm{Pa}\)	\({G}_{\mathrm{tz}}=3.2{10}^{8}\mathrm{Pa}\)
\({\nu }_{\text{lt}}=0.25\)

Stacking:

Orientation:	\([0/90/0]\)
Nature:	\([U/U/U]\)
Thickness:	\([h/3/h/3/h/3]\)

1.3. Boundary conditions and loads

• The plate is simply pressed on its outline

• Uniformly distributed pressure: \(p=3000\mathrm{Pa}\)

1.4. Initial conditions

Not applicable