v3.03.200 SSLS200 - Linear mechanics: shell models

Summary:

This test is a non-regression test. It does not have an analytical solution. The objective is to test a large number of different elementary calculations:

• frame: linear mechanics (MECA_STATIQUE)

• very varied loads (in « real » or « function » form)

• all types of mesh possible

Modeling \(A\):

• Modeling DKT Q4G DST COQUE_3D

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results