7. E modeling#
7.1. Characteristics of modeling#
The model consists of 1 plate with 1 layer.
The elements used are plate DST elements.
7.2. Characteristics of the mesh#
The mesh is regular. We have 40 subdivisions according to \(x\) and 20 subdivisions according to \(y\); that is a total of 1600 points DST (TRIA3) and 861 knots.
7.3. Tested sizes and results#
Identification |
Reference type |
Reference values |
Tolerance |
DZ (\(\mathit{A3}\)) |
“ANALYTIQUE” |
-3.92125E-05 |
0.13 |
DZ (\(\mathit{A2}\)) |
“ANALYTIQUE” |
-3.92125E-05 |
0.13 |
MXX (\(\mathit{A4}\)) |
“ANALYTIQUE” |
10000 |
0.33 |
MXX (\(\mathit{A1}\)) |
“ANALYTIQUE” |
10000 |
0.02 |
Table 7.3-1