B modeling
==============


Characteristics of modeling
-----------------------------------

The reinforcing plies on the lower and upper faces are represented by a grid model.


Characteristics of the mesh
----------------------------

The mesh is the same as that of modeling A.


Tested sizes and results
------------------------------

We test the vertical displacement at the end of the plate, as well as the deformation and the stress in the grid at the end of the plate.


.. csv-table::

    "**Identification**", "**Component**", "**Reference Type**", "**Reference Value**", "**Tolerance**"
    "DEPL — POINT_1 ", "DZ", "'AUTRE_ASTER'", "-87.1E-6"," 4%"



.. csv-table::

    "**Identification**", "**Component**", "**Reference Type**", "**Tolerance**"
    "DEPL — POINT_1 ", "DZ", "'NON_REGRESSION'", "1.E-6"
    "EPSI_NOEU — POINT_2 "," EXX ", "'NON_REGRESSION'", "1.E-6"
    "SIEF_NOEU — POINT_2 "," SIXX ", "'NON_REGRESSION'", "1.E-6"