2. Reference solution

2.1. Calculation method

The reference solution is obtained by the Nastran software.

2.2. Reference quantities and results

The movement on various nodes on the periphery of the central hole of the plate is recorded.

Identification

Reference value

NOEUD =”N000109”, NOM_CMP =”DX” NOEUD =”N000010”, NOM_CMP =”DY” NOEUD =”N000009”, NOM_CMP =”DZ” NOEUD =”N000009”, NOM_CMP =” DRX “ NOEUD =”N000010”, NOM_CMP =” DRY “ NOEUD =”N000002”, NOM_CMP =” DRZ “ NOEUD =”N000002”, NOM_CMP =”DX” NOEUD =”N000009”, NOM_CMP =”DY” NOEUD =”N000014”, NOM_CMP =”DZ” NOEUD =”N000003”, NOM_CMP =” DRX “ NOEUD =”N000002”, NOM_CMP =” DRY “ NOEUD =”N000002”, NOM_CMP =” DRZ “

-8.24903E-06 -1.65058E-05 -1.10249E-01 5.39179E-03 5.57828E-03 0.00000E+00 -8.42702E-06 -1.68364E-05 -1.10747E-01 -5.53148E-03 -5.66054E-03 0.00000E+00

2.3. Uncertainty about the solution

None