Modeling A
==============

Characteristics of modeling
-----------------------------------


.. image:: images/100000000000039D000002634564ECB95E0967B5.png
    :width: 6.3465in
    :height: 3.1492in


.. _RefImage_100000000000039D000002634564ECB95E0967B5.png:


Characteristics of the mesh
----------------------------

Number of knots: 1944

Number of meshes and type: 620 TRIA3 and 1532 QUAD4


Tested sizes and results
------------------------------


* We test the non-regression of the maximum component values SIXX, SIYY on the M1533 mesh.


* We also test the shear stresses of DKT.


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Precision**"
    "SIXZ :math:`\mathit{M1533},\mathit{P1},\mathit{SP1}` ", "'AUTRE_ASTER'", "7.9745E+04"," 1%"
    "SIYZ :math:`\mathit{M1533},\mathit{P1},\mathit{SP1}` ", "'AUTRE_ASTER'", "14377.0954"," 1%"
    "EPXZ :math:`\mathit{M1533},\mathit{P1},\mathit{SP1}` ", "'AUTRE_ASTER'", "1.1681E-06"," 1%"
    "EPXZ :math:`\mathit{M1533},\mathit{P1},\mathit{SP1}` ", "'AUTRE_ASTER'", "2.1060E-07", ""


We visualize the Von Mises stress around the hole:


.. image:: images/100000000000039D0000026361C7FB5EBCDB6578.png
    :width: 6.8693in
    :height: 4.5374in


.. _RefImage_100000000000039D0000026361C7FB5EBCDB6578.png:

**Figure** 3.3-a **: Reference Result**