F modeling
==============


Characteristics of modeling
-----------------------------------

D_ PLAN modeling. We mesh only half of the cylinder (symmetry with respect to plane :math:`y=0`) 40 QUAD8 on the half-circumference and 2 in the thickness.
This modeling makes it possible to validate the consideration of an orthotropic material on cylindrical geometry in 2D via the ORIG_AXE keyword from AFFE_CARA_ELEM/MASSIF.


Characteristics of the mesh
----------------------------

Number of knots: 165

Number of meshes and types: 40 QUAD8


Tested values
---------------

Orthotropic material by MECA_STATIQUE


.. csv-table::

    "**Value**", "**Identification**", "**Reference**"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DY}(\mathrm{PM})` ", "5.8018E—05"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DX}(\mathrm{A1})` ", "5.8018E—05"


Orthotropic material by STAT_NON_LINE


.. csv-table::

    "**Value**", "**Identification**", "**Reference**"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DY}(\mathrm{PM})` ", "5.8018E—05"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DX}(\mathrm{A1})` ", "5.8018E—05"