E modeling
==============


Characteristics of modeling
-----------------------------------

3D modeling. We mesh only half of the cylinder (symmetry with respect to plane :math:`y=0`) 10 meshes HEXA20 in the height, 40 on the half-circumference and 2 in the thickness.


Characteristics of the mesh
----------------------------

Number of knots: 4725

Number of meshes and types: 800 HEXA20


Tested values
---------------

Orthotropic material by MECA_STATIQUE


.. csv-table::

    "**Value**", "**Identification**", "**Reference**"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DY}(\mathrm{PM})` ", "5.8018E—05"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DX}(\mathrm{A1})` ", "5.8018E—05"
    ":math:`\mathrm{Uz}(z=L)` "," :math:`\mathrm{DZ}(\mathrm{A3})` ", "—6.10714E—06"
    ":math:`\mathrm{Uz}(z=L)` "," :math:`\mathrm{DZ}(\mathrm{A4})` ", "—6.10714E—06"


Orthotropic material by STAT_NON_LINE


.. csv-table::

    "**Value**", "**Identification**", "**Reference**"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DY}(\mathrm{PM})` ", "5.8018E—05"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DX}(\mathrm{A1})` ", "5.8018E—05"
    ":math:`\mathrm{Uz}(z=L)` "," :math:`\mathrm{DZ}(\mathrm{A3})` ", "—6.10714E—06"
    ":math:`\mathrm{Uz}(z=L)` "," :math:`\mathrm{DZ}(\mathrm{A4})` ", "—6.10714E—06"