C modeling
==============


Characteristics of modeling
-----------------------------------

Modeling COQUE_3D. We mesh only half of the cylinder (symmetry with respect to plane :math:`y=0`) 10 meshes TRIA7 in the height and 20 on the half-circumference.


.. image:: images/100000000000020E00000391B7000E121AC4A958.png
    :width: 2.6299in
    :height: 4.5654in


.. _RefImage_100000000000020E00000391B7000E121AC4A958.png:


Characteristics of the mesh
----------------------------

Number of knots: 864

Number of meshes and types: 400 TRIA7


Tested values
---------------

Isotropic material


.. csv-table::

    "**Value**", "**Identification**", "**Reference**"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DY}(\mathrm{PM})` ", "5.8018E—05"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DX}(\mathrm{A1})` ", "5.8018E—05"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DX}(\mathrm{A2})` ", "—5.8018E—05"
    ":math:`\mathrm{Uz}(z=L)` "," :math:`\mathrm{DZ}(\mathrm{A3})` ", "—2.4429E—05"
    ":math:`\mathrm{Uz}(z=L)` "," :math:`\mathrm{DZ}(\mathrm{A4})` ", "—2.4429E—05"
    ":math:`\mathrm{SigmaTT}(z=0)` "," :math:`\mathrm{SIZZ}(\mathrm{PM})` ", "2.1375E+06"


Orthotropic material


.. csv-table::

    "**Value**", "**Identification**", "**Reference**"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DX}(\mathrm{PM})` ", "5.8018E—05"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DX}(\mathrm{A1})` ", "5.8018E—05"
    ":math:`\mathrm{Ur}(z=0)` "," :math:`\mathrm{DX}(\mathrm{A2})` ", "—5.8018E—05"
    ":math:`\mathrm{Uz}(z=L)` "," :math:`\mathrm{DZ}(\mathrm{A3})` ", "—6.10714E—06"
    ":math:`\mathrm{Uz}(z=L)` "," :math:`\mathrm{DZ}(\mathrm{A4})` ", "—6.10714E—06"
    ":math:`\mathrm{SigmaTT}(z=0)` "," :math:`\mathrm{SIZZ}(\mathrm{PM})` ", "2.1375E+06"