v3.03.119 SSLS119 - Recessed hook subjected to a sharp force at its end

Summary:

This test represents a static calculation of an embedded hook subjected to a shear force, made of an elastic material. This test makes it possible to validate the following finite element models:

• DST (QUAD4),

• DKT (QUAD4),

• COQUE_3D (QUAD9),

• COQUE_3D (TRIA7),

• Linear (HEXA8) and quadratic (HEXA20) 3D.

In particular, blocking under transverse shear is studied.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Benchmark results
  • 2.2. Uncertainties about the solution
  • 2.3. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
• 4. Model A results
  • 4.1. Tested values
• 5. B modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
• 6. B modeling results
  • 6.1. Tested values
• 7. C modeling
  • 7.1. Characteristics of modeling
  • 7.2. Characteristics of the mesh
• 8. C modeling results
  • 8.1. Tested values
• 9. D modeling
  • 9.1. Characteristics of modeling
  • 9.2. Characteristics of the mesh
• 10. Results of modeling D
  • 10.1. Tested values
• 11. E modeling
  • 11.1. Characteristics of modeling
  • 11.2. Characteristics of the mesh
• 12. E modeling results
  • 12.1. Tested values
• 13. F modeling
  • 13.1. Characteristics of modeling
  • 13.2. Characteristics of the mesh
• 14. F modeling results
  • 14.1. Tested values
• 15. Summary of results