v3.03.114 SSLS114 - Non-regression on a quarter cylindrical shell

Summary:

It is a mechanical test in linear statics.

The aim is to test the pressurization of a quarter of a cylindrical shell with the shell and plate elements.

• 1. Reference problem
  • 1.1. Material properties
  • 1.2. Geometric characteristics
  • 1.3. Boundary conditions and mechanical loads
• 2. Benchmark solution
  • 2.1. Benchmark results
• 3. Modeling A
  • 3.1. Characteristics of the mesh
  • 3.2. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of the mesh
  • 4.2. Tested sizes and results
• 5. C modeling
  • 5.1. Characteristics of the mesh
  • 5.2. Tested sizes and results
• 6. D modeling
  • 6.1. Characteristics of the mesh
  • 6.2. Tested sizes and results
• 7. E modeling
  • 7.1. Characteristics of the mesh
  • 7.2. Tested sizes and results
• 8. F modeling
  • 8.1. Characteristics of the mesh
  • 8.2. Tested sizes and results
• 9. G modeling
  • 9.1. Characteristics of the mesh
  • 9.2. Tested sizes and results
• 10. H modeling
  • 10.1. Characteristics of the mesh
  • 10.2. Tested sizes and results
• 11. Modeling I
  • 11.1. PBCaractéristiques of the mesh
  • 11.2. Tested sizes and results
• 12. Summary of results