v3.03.113 SSLS113 - Excentricity of homogenized plates

Summary:

This test makes it possible to validate the eccentricity of plates with a “ELAS_COQUE” behavior.

The reference is given by a first resolution where an orthotropic bi-layer having a material non-symmetry with respect to the mean plane is modelled.

The validation is done in a second calculation where the behavior of the previous plate is modeled by 2 eccentric monolayer plates with a behavior of “ELAS_COQUE”.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
  • 3.4. notes
• 4. Synthesis