G modeling
==============


Characteristics of modeling
-----------------------------------

The model consists of an eccentric plate of :math:`0.4m` (PLAQ1) (compared to the initial mesh). The total thickness is :math:`\mathrm{0,8}m`. The elements used are Q4G plate elements.



.. image:: images/Object_162.svg
    :width: 196
    :height: 80


.. _RefImage_Object_162.svg:


.. image:: images/Forme94.gif


.. _RefSchema_Forme94.gif:


.. image:: images/Forme95.gif


.. _RefSchema_Forme95.gif:

 :math:`A3`



 :math:`A1`

 + 0.4


Characteristics of the mesh
----------------------------

PLAQ1 z y

 5

 10 x

The mesh is regular. We have 20 subdivisions according to :math:`x` and 10 subdivisions according to :math:`y`; for a total of 200 cells QUAD4 and 231 knots. This modeling shows the influence of meshing on modeling DST.


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference values**", "**Tolerance**"
    "DEPL DX :math:`A3` ", "'ANALYTIQUE'", "—2.97625E-05", "0.005"
    "EFGE_NOEU NXX :math:`A1` ", "'ANALYTIQUE'", "4000", "1.e-9"
    "EFGE_NOEU MXX :math:`A1` ", "'ANALYTIQUE'", "10000", "1.e-9"
    "EFGE_NOEU QX :math:`A1` ", "'ANALYTIQUE'", "-1000", "1.e-9"
    "EFGE_ELNO MXX NOEUD :math:`N1` MAILLE :math:`M1` ", "'ANALYTIQUE'", "8400.0", "1.e-9", "1.e-9"
    "MODE 0", "'NON_REGRESSION'", "18.2307742712", "1.e-9"
    "MODE 1", "'AUTRE_ASTER'", "18.2307742712", "1.e-9"