B modeling
==============


Characteristic of modeling
----------------------------------

The model is the same as that of modeling A, except that instead of having plate DSQ elements, we have DKT elements.


Characteristics of the mesh
---------------------------

 Z Y

 20

 40 x

The mesh is regular. We have 40 subdivisions according to :math:`x` and 20 subdivisions according to :math:`y`; for a total of 1600 mesh DKT and 861 knots.


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference values**", "**Tolerance**"
    "DZ (:math:`\mathrm{A3}`)", "'ANALYTIQUE'", "—3.9062510—5", "0.005"
    "MXX (:math:`\mathrm{A1}`)", "'ANALYTIQUE'", "5000. ", "0.3"
    "QX (:math:`\mathrm{A1}`)", "'ANALYTIQUE'", "-500. ", "0.15"
    "Frequency 1st mode", "'NON_REGRESSION'", "18.25", "0.0001"
    "Frequency 2nd mode", "'NON_REGRESSION'", "88.35", "0.0001"
    "3rd mode frequency", "'NON_REGRESSION'", "100.1", "0.0001", "0.0001"
    "Frequency 4th mode", "'NON_REGRESSION'", "113.5", "0.0001"