v3.03.009 SSLS09 - Thin cylinder under own weight

Summary:

This test from guide VPCS (SSLS 09/89) aims to test a loading volume (here the own weight), in axisymmetric analysis, using the keyword FORCE_INTERNE.

To do this, we will use the two commands: AFFE_CHAR_MECA (modeling A) and AFFE_CHAR_MECA_F (modeling B).

C modeling tests incompressible elements using the PESANTEUR keyword on an equivalent load.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical reference
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
  • 3.4. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested values
  • 4.4. notes
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested values
  • 5.4. notes
• 6. Summary of results