.. _V3.02.315:

**v3.02.315** SSLP315 - Propagation of an emerging crack in a 2D perforated plate of width finished with XFEM
===============================================================================================================

**Summary:**

The aim of this test is to verify that the four propagation methods available in operator PROPA_FISS (mesh, simplex, upwind, geometric) give the same result for :math:`\mathrm{2D}` propagation in mixed mode.

An through crack is propagated in a rectangular plate with three holes and subjected to three-point bending. After four propagations, the position of the bottom of the crack obtained by each method is compared with the reference position given by the mesh method.


.. toctree::
    :hidden:

    self

.. toctree::
    :maxdepth: 2
    :numbered:

    Probl_me_de_r_f_rence
    Solution_de_r_f_rence
    Mod_lisation_A
    Mod_lisation_B
    Mod_lisation_C
    Mod_lisation_D
    Mod_lisation_E
    Synth_se_des_r_sultats