Modeling A
==============


Characteristics of modeling
-----------------------------------


.. image:: images/100002000000017E000002EBF45B52C0EEBB2714.png
    :width: 3.5795in
    :height: 6.0142in


.. _RefImage_100002000000017E000002EBF45B52C0EEBB2714.png:

**Full Template**


.. image:: images/100002000000019400000317720C8FA8E788CC7F.png
    :width: 3.6539in
    :height: 6.2331in


.. _RefImage_100002000000019400000317720C8FA8E788CC7F.png:

**After symmetrization and orientation**


.. image:: images/1000000000000131000000DD6D403AC9F7DFE91F.png
    :width: 3.1776in
    :height: 2.3016in


.. _RefImage_1000000000000131000000DD6D403AC9F7DFE91F.png:

**2D initial block**


.. image:: images/100002000000014B000000EF8A43CE213CB2C354.png
    :width: 3.078in
    :height: 2.2634in


.. _RefImage_100002000000014B000000EF8A43CE213CB2C354.png:

The radius is worth :math:`\mathrm{7,5E-5}m`


Characteristics of the mesh
----------------------------

The mesh consists of 14888 nodes and 6674 elements, including 1392 QUAD8 elements and 5282 TRIA6 elements.

Tested sizes and results
------------------------------


Results achieved with CALC_G
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


.. csv-table::

    "**Identification**", "**Reference (analytical)**", ":math:`\text{\%}` **tolerance**"
    "G", "1.0019 102", "2.0"
    "KI", "3.5750 106", "1.0"
    "KII ", "2.6939 106", "1.0"


**Table** 3.3.1-1


Results achieved with POST_K1_K2_K3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


.. csv-table::

    "**Identification**", "**Reference (analytical)**", ":math:`\text{\%}` **tolerance**"
    "G", "1.0019 102", "4.0"
    "KI", "3.5750 106", "1.2"
    "KII ", "2.6939 106", "3.0"


**Table** 3.3.2-1

The values obtained with POST_K1_K2_K3 are also tested in non-regression:


.. csv-table::

    "**Identification**", "**Reference (non-regression)**", ":math:`\text{\%}` **tolerance**"
    "G", "96.85", "0.1"
    "KI", "3,5379307159775 106", "0,1"
    "KII ", "2.6179089643527 106", "0.1"


**Table** 3.3.2-2

We are also testing the possibility of giving POST_K1_K2_K3 the tables movement jumps directly, by doing a test of in relation to the values previously obtained.


.. csv-table::

    "**Identification**", "**Reference (other aster)**", ":math:`\text{\%}` **tolerance**"
    "G", "96.85", "0.1"
    "KI", "3,5379307159775 106", "0,1"
    "KII ", "2.6179089643527 106", "0.1"


**Table** 3.3.2-3