Modeling A
==============


Characteristics of modeling
-----------------------------------

C_ PLAN modeling. The plate is rotated -30 degrees around :math:`Z`, i.e. the global :math:`X` axis is collinear to the :math:`L` orthotropy axis. The boundary and load conditions, to be applied in the frame :math:`(A,x,y)` linked to the plate, are therefore projected onto the global coordinate system :math:`(A,X,Y)` (use of LIAISON_DDL in :math:`B`).


.. image:: images/100000000000038800000393FFDB1827DB36BBAA.png
    :width: 4.5201in
    :height: 4.5752in


.. _RefImage_100000000000038800000393FFDB1827DB36BBAA.png:


Characteristics of the mesh
----------------------------

Number of knots: 391

Number of meshes and types: 50 QUAD8, 100 TRIA6


Tested values
---------------


.. csv-table::

    "**Value**", "**Identification**", "**Reference**"
    ":math:`\mathit{Ux}(c)\mathrm{=}\mathit{Ux}(D)` "," :math:`\mathit{DX}(C)` ", "5.917 10—7"
    ":math:`\mathit{Uy}(B)` "," :math:`\mathit{DY}(B)` ", "—2.292 10—7"
    ":math:`\mathit{Uy}(C)` "," :math:`\mathit{DY}(C)` ", "—5.028 10—7"
    ":math:`\mathit{Uy}(D)` "," :math:`\mathit{DY}(D)` ", "—7.319 10—7"
    ":math:`\mathit{Sigma}\text{LL}` "," :math:`\mathit{SIXX}` (any point)", "7500"
    ":math:`\mathit{Sigma}\text{TT}` "," :math:`\mathit{SIYY}` (any point)", "2500"
    ":math:`\mathit{Sigma}\text{LL}` "," :math:`\mathit{SIXY}` (any point)", "4300.127"