v3.02.300 SSLP300 — Rectangular cantilever plate

v3.02.300 in flexion-shear in its plane

Summary:

The objective of this test case is to validate the bending of a plate in a plane, under the effect of a cutting force. This is a 2D problem in plane constraints.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Reference solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling A
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. Summary of results