M modeling
==============


Characteristics of modeling
------------------------

Modeling: D_ PLAN (plane deformations)

Type VMIS_ISOT_TRAC elasto-plastic behavior law whose traction law is identical to that of B modeling.

The thermal deformation field from the thermomechanical calculation is extracted in order to be used as a control variable EPSA (command AFFE_MATERIAU) to represent a state of initial deformations of the structure.


Characteristics of the mesh
----------------------------

The mesh is identical to that of modeling A.


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", ":math:`G` **(Reference)**", ":math:`\text{\%}` Tolerance"
    "Crown 1: :math:`\mathit{Rinf}=1`, :math:`\text{Rsup}=5` ", "2.748"," :math:`\text{0.0 1 \%}`"
    "Crown 2: :math:`\mathit{Rinf}=5`, :math:`\text{Rsup}=10` ", "2.747"," :math:`\text{0.0 1 \%}`"
    "Crown 3: :math:`\mathit{Rinf}=10`, :math:`\text{Rsup}=20` ", "2.747"," :math:`\text{0.0 1 \%}`"
    "Crown 4: :math:`\mathit{Rinf}=20`, :math:`\text{Rsup}=30` ", "2.747"," :math:`\text{0.0 1 \%}`"