H modeling
==============


Characteristics of modeling
------------------------

Modeling: AXIS (axi-symmetric).

Type VMIS_ISOT_TRAC elasto-plastic behavior law whose traction law is identical to that of B modeling.

The pre-deformation introduced via the keyword PRE_EPSI from AFFE_CHAR_MECA is defined by a field ELGA derived from the thermomechanical calculation previously carried out.


Characteristics of the mesh
----------------------------

The mesh is identical to that of modeling A.


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", ":math:`G` **(Reference)**", ":math:`\text{\%}` Tolerance"
    "Crown 1: :math:`\mathrm{Rinf}=1`, :math:`\text{Rsup}=5` ", "0.4362"," :math:`\text{0.0 2 \%}`"
    "Crown 2: :math:`\mathrm{Rinf}=5`, :math:`\text{Rsup}=10` ", "0.4360"," :math:`\text{0.0 2 \%}`"
    "Crown 3: :math:`\mathrm{Rinf}=10`, :math:`\text{Rsup}=20` ", "0.4360"," :math:`\text{0.0 2 \%}`"
    "Crown 4: :math:`\mathrm{Rinf}=20`, :math:`\text{Rsup}=30` ", "0.4360"," :math:`\text{0.0 2 \%}`"