B modeling
==============


Characteristics of modeling
------------------------

Modeling: D_ PLAN (plane deformations)

Law of elasto-plastic behavior of type VMIS_ISOT_LINE.

The pre-deformation introduced via the keyword PRE_EPSI in AFFE_CHAR_MECA is defined by an analytical function.


Characteristics of the mesh
----------------------------

The mesh is identical to that of modeling A.


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", ":math:`G` **(Reference)**", ":math:`\text{\%}` Tolerance"
    "Crown 1: :math:`\mathrm{Rinf}=1`, :math:`\text{Rsup}=5` ", "2.748"," :math:`\text{0.0 1 \%}`"
    "Crown 2: :math:`\mathrm{Rinf}=5`, :math:`\text{Rsup}=10` ", "2.747"," :math:`\text{0.0 1 \%}`"
    "Crown 3: :math:`\mathrm{Rinf}=10`, :math:`\text{Rsup}=20` ", "2.747"," :math:`\text{0.0 1 \%}`"
    "Crown 4: :math:`\mathrm{Rinf}=20`, :math:`\text{Rsup}=30` ", "2.747"," :math:`\text{0.0 1 \%}`"