v3.01.402 SSLL402 - Torque ring

Summary:

This test originally made it possible to verify the linear elasticity of the calculation of internal forces and stresses on a curved beam (POU_C_T), these elements have been removed. Straight beams are now being used to deal with the problem.

A modeling makes it possible to test the elements of straight Timoshenko beams (POU_D_T).

The reference solution is analytical and the results obtained are of very good quality.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loading
• 2. Benchmark solutions
  • 2.1. Calculation method used for reference solutions: analytical
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. Summary of results