Modeling A
==============


Characteristics of modeling
------------------------

The characteristics are identical to the reference solution. The modeling is of the D_ PLAN_DIL type.


Characteristics of the mesh
----------------------------

Number of knots 8

Number of SEG3 4

Number of QUAD8 2

Number of group of elements 6


Tested sizes and results
------------------------------








.. csv-table::

    "**Tested value**", "**Instant**", "**Node**", "**Reference**", "**Criterion**", "**Aster**", "**Tolerance**"
    "Displacement GONF ", "1.0"," :math:`N1` "," ", "'ANALYTIQUE'", "RELATIF ", "-0.10", "0.010"
    "DX displacement", "1.0"," :math:`N5` "," ", "'ANALYTIQUE'", "RELATIF ", "0.0250", "0.010"
    "Reaction force SIG1 ", "1.0", "", "", "'ANALYTIQUE'", "RELATIF ", "1.5", "0.010"



notes
---------

In order to validate the resolution option RIGI_MECA_ELAS of STAT_NON_LINE, a calculation identical to the first one (option MATRICE = TANGENTE) is carried out by imposing this resolution option. The results are exactly the same as those obtained with the first calculation option, which are presented in the results table above.