v3.01.116 SSLL116 - Reinforced 3D mesh

Summary:

This test concerns the study of a truss composed of slender beams, using linear static analysis.

The mesh is modelled with line elements (SEG2) and subjected to a point loading and to the effect of gravity.

There is a modeling with a first geometry, then a modeling with reinforcing bars.

This test is an example for educational purposes since it shows the construction of the solution using finite elements rather than using MECA_STATIQUE directly.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Benchmark results
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
  • 4.4. notes
• 5. Summary of results