v3.01.109 SSLL109 - Balance in deformed configuration of a multi-fiber beam

Summary:

This test represents an equilibrium calculation in the deformed configuration of a multi-fiber beam. This test validates option RIGI_GEOM =” OUI “, available only for POU_D_TGM beams.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainties about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Characteristics of the cross-section mesh (fibers)
  • 3.4. Tested sizes and results
• 4. Summary of results