C modeling
==============


Characteristics of modeling
-----------------------------------

2 elements POU_D_TG.

Warping is not bothered.

The shear coefficients are identical to those in modeling B.


Characteristics of the mesh
----------------------------

:math:`2\times 2` mesh SEG_2.


Tested sizes and results
------------------------------

.. csv-table::

    "**Load**", "**Section**", "**Identification**", "**Reference**"
    ":math:`{F}_{y}=1` "," :math:`\mathrm{S1}=\mathrm{S3}` "," :math:`{u}_{y}(B)` ", "2.0156E-7"
    "", "", ":math:`{\theta }_{\mathrm{xy}}(0)` ", "60."
    "", ":math:`\mathrm{S2}` "," :math:`{u}_{y}(B)` ", "1.666552E-7"
    "", ":math:`\mathrm{S4}` "," :math:`{u}_{y}(B)` ", "1.70684E-7"
    "", "", ":math:`{\theta }_{\mathrm{xy}}(0)` ", "35.367765"
    ":math:`{F}_{z}=1` "," :math:`\mathrm{S1},\mathrm{S3}` "," :math:`{u}_{z}(B)` ", "8.0156E-7"
    "", "", ":math:`{\theta }_{\mathrm{xz}}(0)` ", "60."
    "", ":math:`\mathrm{S2}` "," :math:`{u}_{z}(B)` ", "1.17559754E-6"
    "", ":math:`\mathrm{S4}` "," :math:`{u}_{z}(B)` ", "1.70684E-7"
    "", "", ":math:`{\theta }_{\mathrm{xz}}(0)` ", "35.367765"



note
--------

Warping is not bothered. The results are therefore identical to those of modeling B.