Reference problem
=====================

Loading
----------


.. image:: images/10000201000004030000013FFCE4AFF70637B0C6.png
    :width: 7.0228in
    :height: 2.1811in


.. _RefImage_10000201000004030000013FFCE4AFF70637B0C6.png:

**Figure** 1.1-1

A static analysis under load and self-weight (with :math:`\mathrm{\gamma }` =9.81 m/s²) is carried out.


Liaisons
--------


* Support PT_5 (DX=DY=DZ=0, KRZ = 0.0001 N.m/rad)


* Support PT_100 (DX=DY=DZ=0, KRZ = 0.0001 N.m/rad)


* Support PT_10 to PT_90 (KY = 417,480 N/m)


Geometry
---------


.. csv-table::

    "Characteristics", "Value", "Unit"
    "Inertia", "1*108", "mm4"


Table 1.3-1


Material properties
-----------------------


.. csv-table::

    "Characteristics", "Value", "Unit"
    "Young's module", "210,000"," MPa"
    "Poisson's ratio", "0.30", "[-]"


Table 1.4-1


Bibliographical references
---------------------------


1. VPCS: Guide to the validation of structural calculation software packages: "test SSLL16", SFM, AFNOR technique.