Modeling A
==============

Characteristics of modeling
-----------------------------------

Elements POU_D_T.


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of nodes", "Number of elements"
    "79", "78"


Table 2.2-1


Tested sizes and results
------------------------------


.. csv-table::

    "Point", "Quantity and Unit", "Value AFNOR ", "Value ", "Value Pipestress", "Value Aster", "Variance Aster- AFNOR"
    (%)"
    "5"," :math:`\mathrm{\theta }` -rotation (rad)", "-0.030774", "-0.03077019", "-0.030779", "0.1 (*)"
    "20"," :math:`\mathrm{\theta }` -rotation (rad)", "0.030774", "0.03077273", "0.030779", "0.1 (*)"
    "10", "v-arrow (mm)", "-19.206", "-19.206", "-19.214", "-19.21638186", "0.1 (*)"
    "20", "v-arrow (mm)", "53.912", "53.912", "53.920", "53.920", "0.1 (*)"


Table 2.3-1

(*): the value of the difference of 0.1% being the default value for verification by the operator TEST_RESU is indicated when the actual difference is smaller than the default value.


Displacement
-----------


.. image:: images/100002010000039F000001E17194381C45035E59.png
    :width: 6.1472in
    :height: 3.1898in


.. _RefImage_100002010000039F000001E17194381C45035E59.png:

**Figure** 2.4-1