Modeling A
==============

Characteristics of modeling
------------------------

Elements POU_D_T.


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of nodes", "Number of elements"
    "39", "38"


Table 2.2-1


Tested sizes and results
------------------------------


.. csv-table::

    "Point", "Quantity and Unit", "Value AFNOR ", "Value ", "Pipestress Value", "Aster Value", "Variance Aster- AFNOR (%)"
    "20", "UB-arrow (mm)", "134.62", "134.62", "134.654", "134.6131967003", "0.1 (*)"
    "10", "Mt-Torsional moment (N.m)", "74.118", "74", "74.16736442395", "0.1 (*)"
    "10", "Mf-Bending moment (N.m)", "-96.5925", "-96.5925", "-97", "-96.5204677687", "0.1 (*)"


Table 2.3-1

(*): the value of the difference of 0.1% being the default value for verification by the operator TEST_RESU is indicated when the actual difference is smaller than the default value.


Displacement
-----------


.. image:: images/10000201000002E0000001C7CAD7F74A607514CB.png
    :width: 4.7402in
    :height: 2.9307in


.. _RefImage_10000201000002E0000001C7CAD7F74A607514CB.png:

**Figure** 2.4-1