Modeling A
==============

Characteristics of modeling
-----------------------------------

Elements POU_D_T.


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of nodes", "Number of elements"
    "118", "117"


Table 2.2-1


Tested sizes and results
------------------------------


.. csv-table::

    "Point", "Quantity and Unit", "Value AFNOR ", "Value ", "Pipestress Value", "Aster Value", "Variance Aster- AFNOR (%)"
    "10", "u-arrow (mm)", "379.1", "379.1", "379.087", "379.07619112538", "0.1 (*)"
    "10", "v-arrow (mm)", "241.7", "241.7", "241.74", "241.740100389096", "1.659098E-02"
    "10"," :math:`\mathrm{\theta }` -rotation (rad)", "0.1654", "0.1654", "0.16539276", "0.165390795765838", "0.1 (*)"


Table 2.3-1

(*): the value of the difference of 0.1% being the default value for verification by the operator TEST_RESU is indicated when the actual difference is smaller than the default value.


Displacement
-----------


.. image:: images/100002010000038F000001DF0924ED6163EE7E77.png
    :width: 6.0626in
    :height: 3.1874in


.. _RefImage_100002010000038F000001DF0924ED6163EE7E77.png:

**Figure** 2.4-1