Modeling A
==============

Characteristics of modeling
------------------------

Elements POU_D_T, DIS_T


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of nodes", "Number of elements"
    "10", "9"


Table 2.2-1


Tested sizes and results
------------------------------


.. csv-table::

    "Point", "Quantity and Unit", "Value AFNOR ", "Value ", "Value Pipestress", "Value Aster", "Variance: Aster- AFNOR"
    (%)"
    "20", "Vertical reaction (N)", "21,000", "21,000", "21,000", "21013.91236363", "0.1 (*)"
    "20", "M-Bending moment (N.m)", "63 000", "63 000", "63 000", "63050.08450909", "0.1 (*)"
    "20", "v-arrow (mm)", "-10", "-10", "-10", "-10.00662493506", "0.1 (*)"


Table 2.3-1

(*): the value of the difference of 0.1% being the default value for the verification by the operator TEST_RESU is indicated when the actual difference is smaller than the default value.


Displacement
-----------


.. image:: images/100002010000035B00000149B9DD7CA3A15B65FC.png
    :width: 7.1756in
    :height: 2.748in


.. _RefImage_100002010000035B00000149B9DD7CA3A15B65FC.png:

**Figure** 2.4-1