Modeling A
==============

Characteristics of modeling
-----------------------------------

Items POU_D_T


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of nodes", "Number of elements"
    "9", "8"


Table 2.2-1


Tested sizes and results
------------------------------


.. csv-table::

    "Point", "Quantity and Unit", "Value AFNOR ", "Value ", "Pipestress Value", "Aster Value", "Aster Deviation — AFNOR (%)"
    "20", "V-shear force (N)", "-540", "-540", "-540", "-540.000000000065", "0.1 (*)"
    "20", "M-Bending Moment (N.m)", "2 800", "2800", "2739.999999999922", "2.142857E+00"
    "20", "v-arrow (mm)", "-49", "-49.02", "-48.179271708", "1.674956E+00"
    "5", "H-horizontal reaction (N)", "-24000", "-24000", "-24000.000000000004", "0.1 (*)"


Table 2.3-1

(*): the value of the difference of 0.1% being the default value for verification by the operator TEST_RESU is indicated when the actual difference is smaller than the default value.