v2.06.101 SHLL101 - Right beam. Harmonic analysis

Summary:

This two-dimensional problem consists in calculating the forces present in a beam subjected to traction or bending during a harmonic analysis. The reference solution is obtained from discretized equations.

This test includes two models.

For the first modeling, four requests are tested:

• traction force,

• traction force and damping material,

• flexural force,

• flexural force and damping material.

For the second modeling, two stresses are tested:

• traction force,

• traction force and damping material.

The second modeling allows you to test the complex loads imposed by the AFFE_CHAR_MECA_C command.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Reference solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Note for modeling B
  • 2.4. Uncertainty about the solution
  • 2.5. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Quantities tested (real/imaginary shape)
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Quantities tested (real/imaginary shape)
• 5. Summary of results