Modeling A
==============


Characteristics of the mesh
----------------------------

Number of knots: 4945

Number of meshes and types: 768 HEXA20, 120 PENTA15.


.. image:: images/1000020000000245000001C7F8435732C2ABE80F.png
    :width: 4.4236in
    :height: 3.1146in


.. _RefImage_1000020000000245000001C7F8435732C2ABE80F.png:


Tested sizes and results
------------------------------

All the values tested are indicated below. A distinction is made between non-regression tests and analytical references. For the latter, the set of results calculated with*Code_Aster* is equal to the analytical results.


.. csv-table::

    "**Parameter**", "**Location**", "**Reference**", "**Type**"
    "Von Mises stress — static result", "N111/M294"," :math:`\mathrm{307,71}\mathit{MPa}` ", "Non - regression"
    "Von Mises stress — mode 1", "N111/M294"," :math:`\mathrm{9,80}\mathit{MPa}` ", "Non - regression"
    "Von Mises stress — mode 2", "N111/M294"," :math:`-\mathrm{31,15}\mathit{MPa}` ", "Non - regression"
    ":math:`{\alpha }_{\mathrm{Goodman}}` Mode 1", "N111/M294", "35.32", "Analytics"
    ":math:`{\alpha }_{\mathrm{Goodman}}` Mode 1", "min", "21.13", "Non-regression"
    ":math:`{\alpha }_{\mathrm{Goodman}}` Mode 1+0.5 mode 2", "N111/M294", "13.64", "Analytics"
    ":math:`{\alpha }_{\mathrm{Goodman}}` Mode 1+0.5 mode 2", "min", "6, **66**", "Non-regression"
    ":math:`{\alpha }_{\mathrm{Gerber}}` Mode 1", "N111/M294", "46.18", "Analytics"
    ":math:`{\alpha }_{\mathrm{Gerber}}` Mode 1", "min", "27.71", "Non-regression"
    "Maximum allowable displacement
    Mode 1+0.5 Mode 2", "N194", "8.73", "Analytics"