B modeling
==============


Characteristics of B modeling
-------------------------------------

Modeling B is a copy of modeling A in which material ELASpar was replaced by material ELAS_ORTH in order to validate the consideration of damping parameters in the case of orthotropic materials.


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference**", "**Reference type**", "**Tolerance**"
    "Physical calculation: DX at node :math:`\mathit{N433}` "," :math:`9.05292783145e-07m` "," ", "'AUTRE_ASTER'", "1E -4%"
    "Projected matrix calculation:DX at node :math:`\mathit{N433}` "," :math:`8.96432120282e-07m` "," ", "'AUTRE_ASTER'", "1E -4%"
    "SIXX at the Gauss point number 1 of mesh :math:`\mathit{M1145}` "," :math:`4590176.44097\mathit{Pa}` "," ", "'AUTRE_ASTER'", "1E -4%"
    "SIXX to the :math:`\mathit{N627}` knot of knit :math:`\mathit{M1145}` "," :math:`4715493.552\mathit{Pa}` "," ", "'AUTRE_ASTER'", "1E -4%"
    "EPXX at the Gauss point number 1 of mesh :math:`\mathit{M1145}` "," :math:`2.31913955511e-05` "," ", "'AUTRE_ASTER'", "1E -4%"
    "EPXX to the :math:`\mathit{N627}` knot of knit :math:`\mathit{M1145}` "," :math:`2.14446331642e-05` "," ", "'AUTRE_ASTER'", "1E -4%"


Note: the tests are done by inter-comparison between harmonic calculation and transient calculation on a physical basis.

We calculate the kinetic energy ECIN_ELEM of the :math:`\mathit{M1145}` cell:


.. csv-table::

    "**Option**", "**Component**", "**Reference**", "**Reference Type**", "**Tolerance**"
    "ECIN_ELEM "," TOTALE ", "7.02862 10—7", "'AUTRE_ASTER'", "1E -4%"