v2.03.501 SDLS501 - Free vibrations of a corrugated sheet metal in its plane

Summary:

This test represents a dynamic modal analysis calculation of a corrugated sheet in its free-free plane. It makes it possible to validate the modellationsplates DKT and COQUE_SOLIDE.

The frequencies obtained are compared to a reference solution obtained from a COQUE_3D model.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainties about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested sizes and results
• 6. Summary of results