Modeling A
==============


Characteristics of modeling
-----------------------------------


.. _DdeLink__2613_570096261:

The plate consists of 25 QUAD4 meshes modelled in DKT.


.. image:: images/100000000000010A000000ED684365FB7CEDBBD6.png
    :width: 1.8654in
    :height: 1.5862in


.. _RefImage_100000000000010A000000ED684365FB7CEDBBD6.png:


Comparisons and results
-------------------------


Comparisons
~~~~~~~~~~~~

Comparisons are made on the components :math:`\mathit{DX}`, :math:`\mathit{DZ}` and :math:`\mathit{DRY}` of the displacement of the point :math:`\mathit{P2}` as well as on the :math:`\mathit{SIXX}` component of the stresses of the mesh :math:`\mathit{M1}` (POINT 1, SOUS_POINT 1, this sub-point is located at the lower end in the thickness of the shell).

The following 4 figures compare the changes in these values over time for the two calculation codes.


.. image:: images/Object_14.png
    :width: 6.4154in
    :height: 3.3772in


.. _RefSchema_Object_14.png:


.. image:: images/Object_15.png
    :width: 6.3429in
    :height: 3.322in


.. _RefSchema_Object_15.png:


.. image:: images/Object_17.png
    :width: 6.2252in
    :height: 3.6575in


.. _RefSchema_Object_17.png:


.. image:: images/Object_18.png
    :width: 6.4402in
    :height: 3.6165in


.. _RefSchema_Object_18.png:


Tested results
~~~~~~~~~~~~~~~~~

The results tested correspond to the values compared above to the second peak, i.e. for times around :math:`\mathrm{0,042}\mathit{ms}` (the times are slightly different depending on the quantities).


.. csv-table::

    "**Node**", "**Field**", "**Component**", "**Component**", "**Order**", "**Ref. value (** :math:`m` **)**", "**Precision**", "**Component**"
    ":math:`\mathit{P3}` "," DEPL ", "DX", ":math:`5204` "," "," :math:`8.93912E\mathrm{-}4` "," :math:`5.0E\mathrm{-}3` "," SOURCE_EXTERNE"
    ":math:`\mathit{P3}` "," DEPL ", "DZ", ":math:`5250` "," "," :math:`1.3327E\mathrm{-}2` "," :math:`6.0E\mathrm{-}3` "," SOURCE_EXTERNE"
    ":math:`\mathit{P3}` "," DEPL "," DRY "," :math:`5210` "," "," :math:`\mathrm{-}1.99599E\mathrm{-}2` "," :math:`6.0E\mathrm{-}3` "," SOURCE_EXTERNE"



.. csv-table::

    "**Mesh**", "**Field**", "**Comp. , Point,** :math:`S\mathrm{-}P` ", "**Order**", "**Ref Value (** :math:`N\mathrm{/}{m}^{2}` **)**", "**Precision**", "**Reference**"
    ":math:`\mathit{M1}` "," SIEF_ELGA "," SIXX ,1,1", "", "5312"," :math:`1.8317556E+8` "," :math:`3.0E\mathrm{-}3` "," SOURCE_EXTERNE"