B modeling ============== Characteristics of B modeling ------------------------------------- Modeling B is a copy of modeling A in which material ELAS was replaced by an isotropic ELAS_ORTH material in order to validate that the damping parameters were taken into account in this case. Tested sizes and results ------------------------------ Modeling A serves as a reference for all the quantities tested. .. csv-table:: "**Identification**", "**Reference**", "**TYPE reference**", "**Tolerence**" "DX at node N433"," :math:`3.99011179996e-08m` "," AUTRE_ASTER ", "1E -4%" "SIXX to Gauss point number 1 of the M194" mesh," :math:`98510.5400395\mathit{Pa}` "," "," AUTRE_ASTER ", "1E -4%" "SIXX at the N1328 node of the M194 mesh," :math:`98149.5819288\mathit{Pa}` "," "," AUTRE_ASTER ", "1E -4%" "EPXX to Gauss point number 1 of the M194" mesh," :math:`5.27795672536e-07` "," "," AUTRE_ASTER ", "1E -4%" "EPXX at the N1328 node of the M194 mesh," :math:`5.27546476125e-07` "," "," AUTRE_ASTER ", "1E -4%" We calculate the kinetic energy ECIN_ELEM of the :math:`\mathit{M194}` cell: +----------------------------+-------------+-------------+------------------+-------------+ |**Option** |**Component**|**Reference**|**TYPE reference**|**tolerance**| +----------------------------+-------------+-------------+------------------+-------------+ |**Harmonic calculation** | +----------------------------+-------------+-------------+------------------+-------------+ |ECIN_ELEM |TOTALE |1.91599 10—6 |AUTRE_ASTER |1ST -4% | +----------------------------+-------------+-------------+------------------+-------------+ |**Transitional calculation** | +----------------------------+-------------+-------------+------------------+-------------+ |ECIN_ELEM |TOTALE |1.78915 10—6 |AUTRE_ASTER |1ST -4% | +----------------------------+-------------+-------------+------------------+-------------+